Coffee Tables For Living Rooms

Coffee Tables For Living Rooms – When we got our new couch and rearranged our living room, I realized our old coffee table didn’t quite fit the space either. And while I always love the excuse to come up with new projects and designs, I felt a little discouraged because I LOVE our old coffee table (another one Mike made) and didn’t want to see it go. Luckily, we had space for it in our family room, so it’s still around. The new arrangement in the living room looked like it called for a round coffee table, and one that was a little bigger than what we already had in there. We went with maple wood for our table, I love the light color, and the grain and knots in the wood add nice texture and give a little rustic vibe to the piece; while the leg design adds a bit of a modern feel. Once we had our new round coffee table in, I felt like it was the perfect fit for the room! This project is a little more on the involved side as far as wood projects go, but we had a lot of requests for how we did it, so share for those who want to try to tackle a little more involved.

You will need a piece of wood the size that you want yourself to be. We glued 3 pieces of wood together to make one piece the size we wanted (using the same technique we did for this desk).

Coffee Tables For Living Rooms

To cut the round top, we used a router with a base made from a scrap piece of 1/4″ plywood that was attached to the base of the router by removing the base of the router and using the screws to attach the base to the plywood. Base The plywood needs to be longer than half the width you want the table to be.

Modern Centre Tables That Will Transform Your Living Room

Use a straight bit in the router that has a cutting edge longer than the thickness of the table top.

Measure half the width of the table from the edge of the router blade and make a mark on the plywood, drill a 1/8″ hole at this point. Place your wooden top down on some scrap boards. Find the center of the top there and make a mark Use a drywall screw to attach the base of the router, to the hole you drilled, at that location.

Set the router to take a light pass 1/4-3/8″ deep, lower the router as you run down the wood. Start cutting the circumference of the table; lower the blade and repeat until you cut all the way. This can also be done by drawing the circumference of the table and then using a jig saw to cut the top.

How To Style A Family Friendly Coffee Table

To make the base, cut six pieces 1-1/2″ wide by 18″ long and three pieces 1-1/2″ wide by 15″ long.

Using a miter saw with the pieces 18 “, cut the angle of 30 degrees on each side of the piece so that you form a point with the tip in the center of the piece. repeat with all six pieces.

Using the table sign, place the fence so that it is 3/8″ from the side of the blade, set the height of the blade to the thickness of your wood. Use a piece of scrap wood that is 10-12″ long and a couple of inches wide as a push block, cut the ends of the 15″ pieces to stand on end and place the narrow side against the fence. Make cuts on each end of the 3 pieces. Place your fence thickness of wood on the far side of the blade and The height of the blade is 3/8″. Use a push block and cut each end again. You should end up with a piece from each end that is 3/4″ wide and sticks out the thickness of the wood.

Beautiful Living Rooms With Ottoman Coffee Tables

Cut the square ends of the six 18-inch pieces. Place the table fence 3/8″ from the fence with the blade and the height of the blade to the thickness of the wood. Use a piece of scrap wood that is the same width and thickness as the piece you are using and make cuts from each side of the board runs the narrow side against the fence and using a push block. Use a jig saw or roll to cut between the two cutting blades, this should leave you a cut out 3/4″ wide and the thickness of your wood is deep. Check to make sure you have a good fit, you may have to adjust the fence to achieve this. Once you have a good fit make the cuts on the square end of the 6 pieces.

Clamp two of the 18″ pieces to the 15″ piece, one on each end using a square to keep them perpendicular. Repeat with the other two sets. Allow to dry. While they are drying, make 2 pieces that are around 3 “by 3″ by 3/8” thick, they will be used to join the legs of the table together (this can be any shape you want).

After your pieces are dry, put the legs and ends together. Starting with the side down, glue the points where they meet together with the bottom of the 3/8″ piece. Push the legs tightly together and place the piece to join them on top of the joint and use a nail gun to pin it in place. Next pre-drill with screws, put a screw in each leg, allow this to dry and then carefully flip the base and repeat the process on the other side.

Beautiful And Unique Coffee Table Ideas You Will Love

After this has dried, pre-drill holes in the tops of the legs to attach them to the table. Sand the legs and table top. Apply finish on the legs and on the table. Once dry, place the head on a smooth surface (top down), center the legs on the table and fasten with the screws to fasten the legs on top.

© 2019 The Merrythought. All rights reserved. We allow them to share a photo with a link back with proper credit given. No full post or tutorial may be shared without written permission. Download the latest version of your browser.

Let our square coffee table in reclaimed wood occupy the front of the stage in your living room. Artfully and skillfully made to order from a professional wood shop in Arizona, you will find quality know-how and beauty combined in this earth-friendly reclaimed piece.

Amazon.com: Nlager Round Nesting Coffee Tables Set For Living Room White Modern，nesting Tables Sofa Side Nest Of Tables，end Tables For Bed Room Set Of 2 With Solid Metal Frame For Small Space (

Available in natural, provence and espresso. Optional lower shelf. Mix and match with our other pieces to create your own personalized collection. Approximate dimensions. Indoor use only. Factory in Phoenix, Arizona, USA.

Chemically sensitive? We are too. We believe that the way your furniture is manufactured is important and we are committed to taking into account the impacts of our products on health and the environment. We are proud to finish our furniture with a non-toxic lacquer-type sealant that offers superior protection without harmful chemicals.

Our recovered wood will have evidence of this past life. The nail holes, the marks, the discoloration, the grain of the wood and the variations in color are all parts of the story of our wood and we do not disguise this story. We are very selective and each piece of wood is chosen carefully and intentionally. You will find that our tables are well designed and expertly finished while preserving the magnificent and unique aspect of reclaimed wood. These markings represent something old that has become new and the environmentally friendly decision to invest in reclaimed wood furniture.

The Top Ways To Get More Out Of Your Living Room Layout, According To Designers

The free delivery includes curbside unloading of your parcel(s). Full service delivery of white gloves can be added to any order placed by a buyer here /listing/1013347095. The White Glove service applies to all admissible furniture in a single delivery and includes the delivery to the interior of the room of choice, the unpacking, the assembly of all the furniture and the removal of garbage and debris.

Sorry, this article cannot be sent to the country: France. Contact the boutique to find out if shipping is possible.

Ok…this table is completed, touched and studied every time someone enters our new home. I am so proud to have it as a part of our home and it is every bit and more of what I wanted it to be!!! Thank you I believe in total honesty…I refuse to diminish the star of a wonderful piece due to circumstances beyond my control. I’m sure that different shipping companies are used throughout shipping. My shipping experience was difficult but the table was well and truly worth the headache

Best Coffee Tables 2022

We love our coffee table! It is very well crafted and definitely worth the wait. I honestly admire her every day. Thank you Christine!

I love my coffee table